Wet Impregnation Synthesis of Green NCC/TiO2 Hybrid Materials Derived from Oil Palm Empty Fruit Bunches
How to cite (AJARCDE) :
The high volume of agricultural waste in Indonesia, particularly Oil Palm Empty Fruit Bunches (OPEFB), presents a significant opportunity for the development of sustainable, high-value materials. While Titanium Dioxide (TiO?) is widely recognized for its photocatalytic efficiency, its practical application is often hindered by particle agglomeration, which reduces its effective surface area. This research aims to overcome these limitations by synthesizing and characterizing a green hybrid material using Nanocrystalline Cellulose (NCC) derived from OPEFB as a renewable support matrix. The methodology involved the isolation of NCC through sequential delignification and acid hydrolysis, followed by the synthesis of the NCC/TiO? nanocomposite via the wet impregnation method. The research utilized Response Surface Methodology (RSM) to optimize the synthesis process. The process variables investigated included the NCC-to-TiO? ratio (10%, 20%, 30%, 40%, and 50% w/w) and stirring time (20, 40, 60, 80, and 100 minutes), with the final nanocomposite mass serving as the primary response. The results showed that the NCC yield from OPEFB was 43.78%. The optimum condition was achieved at an NCC ratio of 50% and a stirring time of 100 minutes, yielding a nanocomposite mass of 8.8975 grams. Characterization results that the high surface area of the NCC successfully stabilized the TiO? particles with particles measuring 27.52 nm. This study demonstrates that the integration of RSM with green material synthesis provides a highly effective and sustainable approach to valorising palm oil waste into functional photocatalytic hybrid materials.
Contribution to Sustainable Development Goals (SDGs):
SDG 9: Industry, Innovation, and Infrastructure
SDG 12: Responsible Consumption and Production
SDG 13: Climate Action
SDG 15: Life on Land
[1] BPS, "Produksi Kelapa Sawit Menurut Provinsi di Indonesia," Badan Pusat Statistik, 2023.
[2] A. Wulandari, D. M. Hartono, and A. V. Dahlan, "Life cycle assessment analysis of empty oil palm fruit bunches waste from palm oil mill activities," E3S Web Conf., vol. 422, p. 01001, 2023. https://doi.org/10.1051/e3sconf/202342201001
[3] R. Randis, D. B. Darmadi, F. Gapsari, and A. A. A. Sonief, "Isolation and characterization of microcrystalline cellulose from oil palm fronds biomass using consecutive chemical treatments," Case Stud. Chem. Environ. Eng., vol. 9, p. 100616, 2024. https://doi.org/10.1016/j.cscee.2024.100616
[4] P. Kaur et al., "Nanocellulose: Resources, Physio-Chemical Properties, Current Uses and Future Applications," Front. Nanotechnol., vol. 3, p. 747329, 2021. https://doi.org/10.3389/fnano.2021.747329
[5] K. Mishra, N. Devi, S. S. Siwal, V. K. Gupta, and V. K. Thakur, "Hybrid Semiconductor Photocatalyst Nanomaterials for Energy and Environmental Applications: Fundamentals, Designing, and Prospects," Adv. Sustain. Syst., vol. 7, no. 8, p. 2300095, 2023. https://doi.org/10.1002/adsu.202300095
[6] H. A. Permana, F. Delvitasari, W. R. Hartari, and M. Maryanti, "Pengaruh Konsentrasi NaOH dan Suhu Delignifikasi pada Kandungan Lignoselulosa Tandan Kosong Kelapa Sawit," J. Agro Ind. Perkebunan, pp. 51–58, 2024.
[7] X. Yu et al., "Preparation and Characterization of Cellulose Nanocrystal Extraction From Pennisetum hydridum Fertilized by Municipal Sewage Sludge via Sulfuric Acid Hydrolysis," Front. Energy Res., vol. 9, p. 774783, 2021. Volume 9 - 2021 | https://doi.org/10.3389/fenrg.2021.774783
[8] Ratnawati, K. Gabryelle, M. F. A. Ramadhan, and A. S. Handayani, "Sintesis Nanokomposit Berbasis Nanoselulosa-TiO2 Untuk Pengolahan Limbah Red Base 218," IPTEK, vol. 1, pp. 51–57, 2023. https://doi.org/10.31543/jii.v7i1.200
[9] K. Bett and S. Kiprotich, "Effects of Stirring Speed of Precursor Solution on the Structural, Optical and Morphological Properties of ZnO:Al:Ga Co-Doped Nanoparticles Synthesized via a Facile Sol-Gel Technique," Am. J. Condens. Matter Phys., vol. 13, no. 1, pp. 9–20, 2024. https://hdl.handle.net/10625/63238
[10] N. Pimsawat, S. Theerakulpisut, and K. Kamwilaisak, "Tailoring visible-light active TiO2/cellulose nanocomposites with controlled crystalline structure for enhanced photocatalytic performance," Sci. Rep., vol. 14, no. 1, p. 2350749, 2024. https://doi.org/10.1038/s41598-023-50749-2
[11] V. Moodley, S. Maddila, S. B. Jonnalagadda, and W. E. van Zyl, "Degradation of o-chloranil using nanocrystalline cellulose/TiO? composites via a solar photocatalytic route," S. Afr. J. Chem., vol. 75, pp. 91–97, 2021. https://doi.org/10.17159/0379-4350/2021/v75a10
[12] M. Hadiyat, B. Sopha, and B. S. Wibowo, "Preparation and characterization of nanocellulose/TiO? nanocomposites and their application in photocatalytic activity," Appl. Sci., vol. 12, no. 21, p. 10663, 2022.
[13] R. Rohaizu and W. D. Wanrosli, "A nanocellulose-TiO2 composite for photocatalytic degradation of methyl orange," Sains Malaysiana, vol. 46, no. 12, pp. 2413–2419, 2017.
[14] D. Teguh, S. R. Widyaningrum, N. P. Sari, V. Elsyana, L. R. Alvita, and A. Ramandani, “Cellulose Xanthate–alginate Beads from Empty Palm Fruit Bunches: Synthesis, Characterization, and Application in Remazol Red Dye Degradation”, Period. Polytech. Chem. Eng., vol. 69, no. 4, pp. 510–524, Jan. 2025. https://doi.org/10.3311/PPch.42243
[15] Y. R. Wulandari, V. A. Sukma, D. Supriadi, A. A. M. Mufti, Y. Variyana, F. F. Silmi, A. A. Ramandani, S. Sudibyo, and H. S. Wu. "Kinetic Investigation on Thermal Degradation of Empty Oil Palm Bunches Pyrolysis," Periodica Polytechnica Chemical Engineering, vol. 69, no. 1, pp. 67-77, 2025. https://doi.org/10.3311/PPch.38233
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.